section-61c124c
Door installation
Make the most of our expertise and fit your door yourself by following our instructions. This will not only save you money, but will also ensure the quality does not suffer. We will talk you through it step-by-step – with meaningful videos as well as descriptions, including a whole range of helpful tips. This will ensure you are fully informed and can proceed without any concerns.
section-bfe832e
Install your new hinged door yourself in only 10 steps
Preparatory measures
1st step:
Remove the old door in a professional manner. If you are dealing with two-part hinges, you can simply remove the door from its housing. In the case of three-part hinges, undo the fixings first.
2nd step:
Remove the profiled architrave of the door frame. If it refuses to budge, use a spanner to exert a little pressure to help.
3rd step:
Now remove the second, adhered door frame element. You will need a hammer to do so. Apply more pressure than in step 2 when you were using the spanner.
These aids will help you to install your hinged door:
- Filler (silicone)
- Cordless screwdriver
- Phillips head
- Screwdriver
- Hammer
- Shims and wooden discs
- Spirit level (short and long)
- Carpenter’s rule
- Struts (2)
- Two-component installation foam
section-0be1b11
Measurements
-
Carrying out the measurements correctly
4th step:
Measure the wall-opening width – to make sure, do so at several points (this also applies to steps 5 and 6).
5th step:
Measure the wall-opening height. When doing so, take the floor covering into account (e.g. tile height).
6th step:
Measure the wall thickness. When doing so, ensure you take the wall construction into account (e.g. additional plastering).
section-a19e2df
Installing the door
-
Installing the door
